Bike Tire Losing Air Through Valve – How To Fix!


Our editors independently research, test, and recommend the best products, and articles are reviewed by professionals. As an affiliate of Amazonwe may receive commissions on purchases made from our chosen links at no extra cost to you.

Why is My Bicycle Tire Losing Air Through Valve? A bicycle tire losing air through a valve is quite common, especially among the cheaper brands. Lacking a valve core, the tire doesn’t have a way to be reinflated.

However, there are methods that can fix this problem and allow you to get back on your bike as fast as possible.

First off, if your bicycle has quick-release levers on its wheels it should be simple enough to take the wheel off the front of your bike and secure it around something heavy.

Pull the lever on the wheel and start pumping the tire. It’s advised you always have your Topeak bicycle pump or any other pump standby to help you get back on track in situations like this.

It is important that you don’t push down too hard, or you may rip your rim off instead of getting your tire back up to pressure.

Wear work gloves while doing this if you have any available. After that, put the wheel back on, and start pedaling as normal.

Hopefully once again on a flat surface! If for some reason you still have a flat (most likely due to a broken seal), then it’s not too much of a problem. You can take the wheel off again and this time use a bicycle pump such as the Topeak bicycle pump that is rated for cycling tires.

After that, just make sure that you’ve got your bike in a position where it can be rolled by hand onto another flat surface.

READ ALSO: How Do I Keep My Bike Rack From Being Stolen?

It might take some practice to find the right place to roll your bike so you’ll be able to get it on your ground without any help from anyone else.

It would be great if the surface was even and could take the weight of your bike without sinking in too much. This should cause your air pressure to go up naturally, and you should be on your way.

No Cycling Shop Nearby?

If you’re in a situation where you have no cycling shop near you or they don’t have any tires for sale, then there are several other things you can do to get rid of that flat.

The first thing to do is to pump your tire back up to its normal pressure, or at least close to it. Then, take your bike and roll it back and forth across the surface you found.

This will knock the air out of some of the holes in your tire, which should make it easier for you to get rid of that flat.

Another option is to buy a tire lever in or near where you live. They are cheap, and you can find them at most hardware stores.

If you have one, take your tire off like normal and then wedge it into your bike wheel. From there, make sure to turn the lever very slowly until you are able to get that last bit of air out of your tire.

When to Buy a New Bike Tire?

There is an easy way to know if it’s time for a new bike tire; just go out and test ride your bike on some rough ground.

If you notice that your bike is leaving a skid mark on the ground, or you are having to pump up your tire more and more every time you go for a ride, then it’s probably time to purchase a new bike tire for your bike.

If that’s the case, take your wheel off and replace that old tire with a brand new one. Check to make sure that the tire fits well, and also that it is centered properly inside of the rim.

If the spokes on your rim are bent, then you should take the wheel to a professional bike shop in your area and pay them to straighten them back out.

There are many other things that can go wrong with a bike tire, but if you’ve got a flat one of the methods listed above should be able to solve your problem. If not, then just keep trying until you get it right.

How do you fix a bike tire valve?

If your bike tire valve has a leak, the first thing you should do is stop using that valve and inflate the tire with the opposite one.

If you have an ugly hole in your bike tire valve or if it is broken, then you can try patching it using a piece of rubber inner tube; however, this usually won’t work.

You should replace your valve if the above method doesn’t work out. The easiest way of doing this is to purchase a new one and replace your old one. The Muc Off Tubeless Presta Valves is highly recommended.

If you want to replace your valve barrel, don’t go for the cheapest option. Try to find a barrel that has the ability to hold air pressure, so it will be able to prevent leaks in the future.

Also, take into consideration how you are going to mount the new one. Do it in a way that is secure and, so if you fall on your bike and break it, then it will stay put on your bike.

How to fix a flat tire?

To fix a flat, you need to get it up to a position where you can easily apply some force. Assuming that you don’t have any other choice and you don’t want to ride around on it, here are some ways that may help you.

  • The first thing to do is take your bike off the pannier rack with only your front wheel on the ground.
  • After that, push it until you get to a place where you can lay your bike’s seat flat on the ground.
  • The next thing is to flip up the back wheel and pull it off your bike.
  • If there are already holes in the tire, then you don’t need to worry about this step. However, if one or more of the holes are still sealed, then you need to inflate your tire using a bicycle pump and try to get as much air into it as possible before deflating it again.
  • After that, put your bike’s seat back on and then put the wheel back on. Put the front wheel back on, too. You should now be once again riding your bike as normally.

What to do if you can’t ride around with a flat?

If you can’t ride around with a flat, then you need to figure out what exactly caused it and try to fix it before you drive up a wall or something.

For example, if you got a flat while you were taking a ride on the road and rode into something big, then your tire may have been punctured.

READ ALSO: How Much Should I Spend On Bike Tires?

There are many things that can cause this, such as objects in the road where other vehicles might be driving or even fallen trees.

Whatever it may be, you need to stop what you’re doing as soon as possible and check it out. If it is a puncture, then you need to fix it before the air gets out of your tire and makes things worse.

How do you stop air from coming out of a bike tire valve? – Conclusion

In conclusion, if you are one of those people who frequently have a flat tire then you know that it is frustrating.

With the many methods listed above, you now know how to fix your tire if things don’t go as planned. Hopefully, you now have more knowledge about what causes them and are able to fix them yourself without having to pay a large sum of money for someone else to do it.

Leave a Comment